INTERPRETATION OF FLOWNET - IN SOIL MECHANICS

✔ Vk on March 22, 2023 0 Comment

INTERPRETATION OF FLOW NET - IN SOIL MECHANICS :

FLOW RATE:

Let the total head loss across the flow domain be ΔH, that is, the difference between upstream and downstream water level elevation.

Then the head loss (Δh) between each consecutive pair of equipotential lines is

∆h = ∆H/Nd

where Nd is the number of equipotential drops,

that is = the number of equipotential lines minus one.

Therefore, Δh = ΔH/Nd

From Darcy’s law, the flow rate is

q= k.H.Nf /Nd

where Nf is the number of flow channels (number of flow lines minus one).

The ratio N f /N d is called the shape factor. Finer discretization of the flow-net by drawing more flow lines and equipotential lines does not significantly change the shape factor.

Hydraulic Gradient:

You can find the hydraulic gradient over each curvilinear square by dividing the head loss by the length, L.that is,
i= ∆h/L
You should notice that L is not constant. Therefore, the hydraulic gradient is not constant.
The maximum hydraulic gradient occurs where L is a minimum; that is,
Imax =∆h / Lmin
where L min is the minimum length of the cells within the flow domain.
Usually, L min occurs at exit points or around corners, and it is at these points that we usually get the maximum hydraulic gradient.

Critical Hydraulic Gradient:

We can determine the hydraulic gradient that brings a soil mass (essentially, coarse-grained soils) to static liquefaction.
Static liquefaction, called quicksand condition, occurs when the seepage stress balances the vertical stress from the soil. The critical hydraulic gradient, i cr , is
icr = (G-1) /1+e)
where G s is specific gravity of the soil particles, and e is the void ratio.
Since G s is constant, the critical hydraulic gradient is solely a function of the void ratio of the soil.
In designing structures that are subjected to steady-state seepage, it is absolutely essential to ensure that the critical hydraulic gradient cannot develop.

Pore Water Pressure Distribution:

Uplift Forces:

Lateral and uplift forces due to groundwater flow can adversely affect the stability of struc- tures such as dams and weirs. The uplift force per unit length (length is normal to the xz plane) is found by calculating the porewater pressure at discrete points along the base (in the x direction,) and then finding the area under the porewater pressure distribu- tion diagram

IMPORTENT Terms:

1. A flow-net is a graphical representation of a flow field that satisfies Laplace’s equation and comprises a family of flow lines and equipotential lines.

2. From the flownet, we can calculate the flow rate, the distribution of heads, pore- water pressures, and the maximum hydraulic gradient.

3. The critical hydraulic gradient should not be exceeded in design practice.

SUMMARY:

The governing equation for flow of water through soils is Laplace’s equation.
A graphical technique, called flownet sketching, was used to solve Laplace’s equation.
A flownet consists of a network of flow and equipotential lines.
From the flow-net, we can calculate the flow rate, the distribution of heads, pore-water pressures, and the maximum hydraulic gradient.

Walls and Its Type - In Civil Engineering Study

✔ Vk on March 21, 2023 0 Comment

Walls and Its Type - Civil ENGINEERING study

Walls are built to partition living area into different parts.They impart privacy and protection against temperature, rain and theft.

Walls may be classified as

1. Load bearing walls
2. Partition walls.

1. Load Bearing Walls:

If beams and columns are not used, load from roof and floors are transferred to foundation by walls. Such walls are called load bearing walls.
They are to be designed to transfer the load safely.
The critical portion of the walls are near the openings of doors and windows and the positions where concrete beams rest.

Minimum wall thickness used is 200 mm. It is also recommended that the slenderness ratio of wall defined as ratio of effective length or effective height to thickness should not be more than 27. The effective height and effective length of a wall may be taken as shown in tables respectively.

Effective height of walls in terms of actual height H

Sno	End Condition	Effective Height
1	Lateral as well as rotational restraint	.75H
2	Lateral as well as rotational restraint at one end and only lateral restraint at other	.85H
3	Lateral restraint but no rotational restraint at both ends	1.0H
4	Lateral and rotational restraint at one end and no restraint at other ends (compound walls, parapet walls etc.).	1.5H

Effective length of walls of length L

Sno	End Condition	Effective LENGHT
1	continuous and supported by cross walls	.8L
2	Continuous at one end and supported by cross walls at the other end	.9L
3	Wall supported by cross walls at each end	1.0L
4	Free at one end and continuous at other end	1.5L
5	Free at one end and supported by cross wall at other end	2.0L

2. Partition Walls:

In framed structures partition walls are built to divide floor area for different utilities.
They rest on floors. They do not carry loads from floor and roof.
They have to carry only self-weight. Hence normally partition walls are thin.
Table shows the differences between load bearing walls and partition walls.
Depending upon the requirement these walls may be brick partition, clay block partition, glass partition, wood partition, and aluminum and glass partition.

Differences between load bearing and partition walls

S No	Load Bearing Wall	Partition Wall
1	They carry loads from roof, floor, self-weight etc.	They carry self-weight only.
2	They are thick and hence occupy more floor area.	These walls are thin and hence occupy less floor area.
3	As the material required is more,the construction cost is more.	As the material required is less, the construction cost is less.
4	Stones or bricks are used for the construction.	Stones are not used for the construction of partition walls

PHASES OF SOIL INVESTIGATION WORK

✔ Vk on March 18, 2023 0 Comment

PHASES OF A SOILS INVESTIGATION

The scope of a soils investigation depends on

The type, size, and importance of the structure;
The client and Economy;
The engineer’s familiarity with the soils at the site; and
Local building codes.

Structures that are sensitive to settlement such as machine foundations and high-use buildings usually require a more thorough soils investigation than a foundation for a house. A client may wish to take a greater risk than normal to save money and set limits on the type and extent of the site investigation.

You should be cautious about any attempt to reduce the extent of a soils investigation below a level that is desirable for assuming acceptable risks for similar projects on or within similar ground conditions.

If the geotechnical engineer is familiar with a site, he/she may undertake a very simple soils investigation to confrm his/ her experience. Some local building codes have provisions that set out the extent of a site investigation.

It is mandatory that a visit be made to the proposed site.

A soils investigation has following components.

The first component is done prior to design.
The second component is done during the design process.
The third component is done during construction.
The second and third components are needed for contingencies.
The first component is generally more extensive and is conducted in phases.

Phases of SOIL INVESTIGATION are as follows:

1. DESK STUDY
2.PRELIMINARY RECONNAISSANCE OR A SITE VISIT
3.DETAILED SOIL EXPLORATION
4.LABORATORY TESTING
5.WRITE A REPORT

Phase I. DESK STUDY

This phase is sometimes called “desk study.” It involves collection of available information such as a site plan; type, size, and importance of the structure; loading conditions; previous geotechnical reports; maps, including topographic maps, aerial photo- graphs, still photographs, satellite imagery, and geologic maps; and newspaper clippings. An assortment of maps giving geology, contours and elevations, climate, land use, aerial photos, regional seismicity, and hydrology are available on the Internet. Geographical information system (GIS)—an integration of software, hardware, and digital data to capture, manage, analyze, and display spatial information— can be used to view, share, understand, question, interpret, and visualize data in ways that reveal relationships, patterns, and trends. GIS data consist of discrete objects such as roads and continuous fields such as elevation. These are stored either as raster or vector objects. Google Earth can be used to view satellite imagery, maps, terrain, and 3D structures. You can also create project maps using Google Earth.

Phase II. PRELIMINARY RECONNAISSANCE OR A SITE VISIT

Preliminary reconnaissance or a site visit to provide a general picture of the topography and geology of the site. It is necessary that you take with you on the site visit all the information gathered in Phase I to compare with the current conditions of the site. Your site visit notes should include:

■ Photographs of the site and its neighborhood.
■ Access to the site for workers and equipment.
■ Sketches of all fences, utility posts, driveways, walkways, drainage systems, and so on.
■ Utility services that are available, such as water and electricity.
■ Sketches of topography including all existing structures, cuts, flls, ground depression, ponds, and so on.
■ State of any existing building at the site or nearby. Your notes should include exterior and interior cracks, any noticeable tilt, type of construction (e.g., brick or framed stucco building), evidence of frost damage, molds, and any exceptional features.
■ Geological features from any exposed area such as a road cut.
■ Occasionally, a few boreholes, trenches, and trial pits may be dug to explore the site.

Phase III. DETAILED SOIL EXPLORATION

Detailed soils exploration. The objectives of a detailed soils exploration are:

■ To determine the geological structure, which should include the thickness, sequence, and extent of the soil strata.

■ To determine the groundwater conditions.

■ To obtain disturbed and undisturbed samples for laboratory tests.

■ To conduct in situ tests.

Phase IV. LABORATORY TESTING

Laboratory testing. The objectives of laboratory tests are:

■ To classify the soils.

■To determine soil strength, failure stresses and strains, stress–strain response, permeabilities, compactibility, and settlement parameters.

Not all of these may be required for a project.

Phase V. WRITE A REPORT

Write a report. The report must contain a clear description of the soils at the site, methods of exploration, soil strati-graphy, in situ and laboratory test methods and results, and the location of the groundwater. You should include information on and/or explanations of any unusual soil, water-bearing stratum, and any soil and groundwater conditions such as frost susceptibility or waterlogged areas that may be troublesome during construction.

Key points

1. A soils investigation is necessary to determine the suitability of a site for its intended purpose.

2. A soils investigation is conducted in phases. Each phase affects the extent of the next phase.

3. A clear, concise report describing the conditions of the ground, soil stratigraphy Stratigraphy is a branch of Geology and the Earth Sciences that deals with the arrangement and succession of strata, or layers, as well as the origin, composition and distribution of these geological strata., soil parameters, and any potential construction problems must be prepared for the client

Lime - Tests on Limestone

✔ Vk on March 17, 2023 0 Comment

Tests on Limestones

The following practical tests are made on limestones to determine their suitability:

(i) Physical tests
(ii) Heat test
(iii) Chemical test
(iv) Ball test.

(i) Physical Test:

Pure limestone is white in colour. Hydraulic limestones are bluish grey, brown or are having dark colours. The hydraulic lime gives out earthy smell. They are having clayey taste. The presence of lumps give indication of quick lime and unburnt lime stones.

(ii) Heat Test:

A piece of dry stone weighing W1 is heated in an open fire for few hours. If weight of sample after cooling is W2, the loss of weight is W2 – W1. The loss of weight indicates the amount of carbon dioxide. From this the amount of calcium carbonate in limestone can be worked out.

(iii) Chemical Test:

A teaspoon full of lime is placed in a test tube and dilute hydrochloric acid is poured in it. The content is stirred and the test tube is kept in the stand for 24 hours. Vigourous effervescence and less residue indicates pure limestone. If effervescence is less and residue is more it indicates impure limestone.

If thick gel is formed and after test tube is held upside down it is possible to identify class of lime as indicated below:

• Class A lime, if gel do not flow.

• Class B lime, if gel tends to flow down.

• Class C lime, if there is no gel formation.

(iv) Ball Test:

This test is conducted to identify whether the lime belongs to class C or to class B. By adding sufficient water about 40 mm size lime balls are made and they are left undisturbed for six hours. Then the balls are placed in a basin of water. If within minutes slow expansion and slow disintegration starts it indicates class C lime. If there is little or no expansion, but only cracks appear it belongs to class B lime.

Building with Lime: Past, Present, and Potential, Types and Properties

✔ Vk on March 16, 2023 0 Comment

Building with Lime:

Past, Present, and Potential, Types and Properties

Lime

It is an important binding material used in building construction. Lime has been used as the material of construction from ancient time. When it is mixed with sand it provides lime mortar and when mixed with sand and coarse aggregate, it forms lime concrete.

Lime is a versatile material that finds applications in various fields, including construction, agriculture, and chemistry. There are two primary types of lime: quicklime (calcium oxide, CaO) and hydrated lime (calcium hydroxide, Ca(OH)2). Let's explore some aspects of lime:

Production:

Quicklime (CaO): Produced by heating limestone (calcium carbonate, CaCO3) at high temperatures (typically around 900–1000°C) in a process known as calcination.
Hydrated Lime (Ca(OH)2): Produced by treating quicklime with water.

Uses:

Construction: Lime has been traditionally used in construction for various purposes, such as mortar and plaster. It reacts with carbon dioxide in the air and slowly turns back into calcium carbonate, resulting in a durable and stable material.
Soil Stabilization: Lime is used to stabilize soil in construction projects, improving its engineering properties and reducing plasticity.
Water Treatment: Hydrated lime is often used in water treatment processes to adjust pH levels and precipitate impurities.
Agriculture: Agricultural lime (usually in the form of crushed limestone) is added to soil to neutralize acidity, providing essential nutrients for plant growth.
Chemical Industry: Lime is used in various chemical processes, including the production of calcium-based chemicals and as a reactant in industrial processes.

Chemical Properties:

Quicklime is highly reactive and exothermic when it reacts with water, producing heat.
Hydrated lime is a dry powder that results from the chemical transformation of quicklime in the presence of water.

Safety Considerations:

Quicklime is caustic and can cause burns. Proper safety measures, including protective equipment, should be used when handling it.

It's important to note that the application and properties of lime can vary based on the specific type of lime used and the intended use.

Types of Limes and their Properties

The limes are classified as fat lime, hydraulic lime and poor lime:

(i) Fat lime:

It is composed of 95 percentage of calcium oxide. When water is added, it slakes vigorously and its volume increases to 2 to 2.5 times. It is white in colour.

Its properties are:

(a) hardens slowly
(b) has high degree of plasticity
(c) sets slowly in the presence of air
(d) white in colour
(e) slakes vigorously.

(ii) Hydraulic lime:

It contains clay and ferrous oxide. Depending upon the percentage of clay present, the hydraulic lime is divided into the following three types:

(a) Feebly hydraulic lime (5 to 10% clay content)
(b) Moderately hydraulic lime (11 to 20% clay content)
(c) Eminently hydraulic lime (21 to 30% clay content)

The properties of hydraulic limes are:

• Sets under water
• Colour is not perfectly white
• Forms a thin paste with water and do not dissolve in water.
• Its binding property improves if its fine powder is mixed with sand and kept in the form of heap for a week, before using.

(iii) Poor lime:

It contains more than 30% clay. Its colour is muddy. It has poor binding property. The mortar made with such lime is used for inferior works.

IS 712-1973 classifies lime as class A, B, C, D and E.

Class A Lime:

It is predominently hydraulic lime. It is normally supplied as hydrated lime and is commonly used for structural works.

Class B Lime:

It contains both hydraulic lime and fat lime. It is supplied as hydrated lime or as quick lime. It is used for making mortar for masonry works.

Class C Lime:

It is predominently fat lime, supplied both as quick lime and fat lime. It is used for finishing coat in plastering and for white washing.

Class D Lime:

This lime contains large quantity of magnesium oxide and is similar to fat lime. This is also commonly used for white washing and for finishing coat in plastering.

Class E Lime:

It is an impure lime stone, known as kankar. It is available in modular and block form. It is supplied as hydrated lime. It is commonly used for masonry mortar

Structure where Lime is Used

One of the most iconic and well-known structures that extensively used lime as a binding material is the Roman Pantheon. The Pantheon is an ancient temple located in Rome, Italy, and is renowned for its architectural and engineering marvel.

The Pantheon:

Construction Period:
- The Pantheon was commissioned during the reign of Emperor Hadrian in 118–128 AD. However, the original structure on the site was built by Marcus Agrippa around 27 BC and later rebuilt by Emperor Hadrian.
Architectural Features:
- The Pantheon is known for its remarkable dome, which was the largest unreinforced concrete dome in the world for many centuries.
- The dome has a central oculus (circular opening) at the top, allowing natural light to enter the interior.
Use of Lime in Construction:
- Lime played a crucial role in the construction of the Pantheon. The Romans used a type of mortar known as pozzolana mortar, which consisted of lime, volcanic ash (pozzolana), and water.
- Pozzolana mortar is highly durable and has excellent hydraulic properties. The addition of pozzolana allowed the Romans to create concrete that could set underwater and gain strength over time.
Concrete Construction:
- The Pantheon's dome is made of concrete, and the Romans employed a method of constructing concrete using a mixture of lime, pozzolana, and aggregates such as crushed volcanic rock and bricks.
- The use of this concrete allowed for the creation of large and stable structures, and the Pantheon's dome is a testament to the engineering expertise of the Romans.
Durability and Longevity:
- The Pantheon stands as a testament to the durability of Roman concrete and lime-based mortar. Despite its age, the structure has survived earthquakes and the test of time.
Symbolic Importance:
- The Pantheon has been repurposed over the centuries and is now a Christian church (Basilica di Santa Maria ad Martyres). Its conversion contributed to its preservation.

The Pantheon remains an architectural marvel, and the use of lime-based materials in its construction highlights the ingenuity of ancient Roman engineers. The properties of lime and the technology used in structures like the Pantheon have influenced construction practices throughout history

Historical Use of Lime

Lime has a rich history dating back thousands of years, and its use has evolved over time. Here's a brief overview of the history of lime:

Ancient Uses:
- The use of lime can be traced back to ancient civilizations. The Egyptians used a form of lime for various construction purposes, and evidence suggests that lime mortars were used in the construction of the pyramids.
- The Greeks and Romans also extensively used lime-based materials in their construction projects. The Romans, in particular, developed advanced techniques for producing lime and pozzolana-based concrete, as seen in structures like the Pantheon.
Middle Ages:
- The knowledge of lime production and use continued into the Middle Ages. Medieval builders in Europe used lime mortar for constructing cathedrals, castles, and other structures.
- Lime kilns, used to produce quicklime by heating limestone, became more widespread during this period.
Renaissance and Early Modern Period:
- The Renaissance saw a revival of interest in classical architecture, and the use of lime continued to be prominent. The development of lime-based plasters and finishes contributed to the aesthetic aspects of buildings during this period.
18th and 19th Centuries:
- The Industrial Revolution brought about advancements in lime production. Lime kilns became more efficient, and the demand for lime in construction, agriculture, and industry increased.
- Lime was a key component in mortar for brick construction during the 19th century, contributing to the growth of urban areas.
20th Century:
- Portland cement, an alternative to lime-based mortars, gained popularity in the construction industry during the 20th century. However, lime continued to be used in heritage restoration and conservation projects due to its compatibility with historic structures.
Contemporary Uses:
- Today, lime is still utilized in various industries. In construction, lime is employed for mortar, plaster, and soil stabilization. It remains an essential material in the restoration of historic buildings.
- Agricultural lime, which is crushed limestone or dolomite, is used to neutralize soil acidity and improve crop yields.

Throughout history, lime has played a crucial role in the development of architectural and construction practices. Its enduring popularity is attributed to its versatility, durability, and compatibility with a wide range of materials. The historical use of lime in iconic structures highlights its significance in the built environment.

Chemical Constituents of Lime

Lime is a general term that refers to a range of calcium-containing inorganic materials. The two primary types of lime are quicklime (calcium oxide, CaO) and hydrated lime (calcium hydroxide, Ca(OH)2). Let's delve into the constituents of each:

Quicklime (Calcium Oxide, CaO):
- Chemical Formula: CaO
- Production: Quicklime is produced by heating limestone (calcium carbonate, CaCO3) in a lime kiln at high temperatures (typically around 900–1000°C) in a process known as calcination.
- Properties:
  - Quicklime is a white, crystalline solid at room temperature.
  - It is highly reactive with water, producing heat in an exothermic reaction.
  - When quicklime reacts with water, it forms hydrated lime (calcium hydroxide).
Hydrated Lime (Calcium Hydroxide, Ca(OH)2):
- Chemical Formula: Ca(OH)2
- Production: Hydrated lime is produced by adding water to quicklime. This process is known as slaking or hydration.
- Properties:
  - Hydrated lime is a dry, fine powder.
  - It is less reactive than quicklime but still exhibits some reactivity with water.
  - The chemical reaction between quicklime and water results in the formation of calcium hydroxide.
Pozzolana (Optional Constituent in Lime-Based Materials):
- Definition: Pozzolana refers to siliceous or siliceous and aluminous materials that, in themselves, possess little or no cementitious value but will, in finely divided form and in the presence of moisture, chemically react with calcium hydroxide at ordinary temperatures to form compounds possessing cementitious properties.
- Examples: Volcanic ash, fly ash, and certain natural clays are examples of pozzolanic materials.
- Use: Pozzolanic materials are often added to lime-based materials, like mortars and concretes, to enhance their properties, such as setting time and strength.

The chemical reactions involved in the production of lime and its subsequent use in construction involve the transformation of calcium carbonate into calcium oxide and, eventually, into calcium hydroxide. These reactions are fundamental to the functionality and versatility of lime-based materials in various applications, from traditional mortar and plaster to more advanced construction techniques.

Clay and Lime Reactivity

The presence of clay in Lime Affect:

The presence of clay in lime can significantly influence the properties and performance of lime-based materials. While lime is often used in construction for its binding and stabilizing properties, the addition of clay can affect various aspects, such as workability, strength, and durability. Here are some effects of the presence of clay in lime:

Workability:
- Positive Aspect: Small amounts of clay can enhance the workability of lime mortars. Clay acts as a plasticizer, making the mix more malleable and easier to work with.
- Negative Aspect: Excessive clay content can lead to poor workability, making the lime mix difficult to handle and apply.
Setting Time:
- Positive Aspect: Clay can contribute to the setting and hardening of lime-based materials by promoting pozzolanic reactions. Pozzolanic reactions involve the combination of lime with silica and alumina in the clay, forming compounds with cementitious properties.
- Negative Aspect: Excessive clay content may lead to delayed setting times, affecting the construction schedule. It's crucial to find the right balance to achieve a reasonable setting time.
Strength:
- Positive Aspect: The addition of clay can enhance the strength of lime-based materials. Pozzolanic reactions contribute to the development of additional cementitious compounds, improving the overall strength and durability.
- Negative Aspect: Very high clay content may lead to a reduction in strength and durability, as excessive amounts of clay can disrupt the formation of a well-structured matrix.
Durability:
- Positive Aspect: Properly proportioned clay content can improve the durability of lime-based materials, making them more resistant to weathering and environmental factors.
- Negative Aspect: Excessive clay content can lead to poor durability, as it may result in shrinkage, cracking, and reduced resistance to freeze-thaw cycles.
Compatibility:
- Positive Aspect: Clay can improve the compatibility of lime with certain aggregates, providing a more cohesive mix.
- Negative Aspect: Incompatibility issues may arise if the clay content is too high, leading to segregation or poor adhesion with other materials.

In summary, the presence of clay in lime can have both positive and negative effects on properties depending on the proportion and the specific application. It requires careful consideration and proper mixing to achieve the desired balance between workability, strength, and durability. Engineers and builders often conduct tests and evaluations to determine the optimal clay content for a given lime-based material in order to achieve the desired performance.

Contact of Lime and Hardened Concrete:

When lime comes into contact with hardened concrete, it can lead to a phenomenon known as delayed ettringite formation (DEF). Ettringite is a crystalline compound that forms as part of the cement hydration process. However, when lime is introduced to hardened concrete under certain conditions, it can react with existing constituents and cause DEF. Here's an explanation of the process and its potential negative effects on hardened concrete:

Delayed Ettringite Formation (DEF):

Reaction Mechanism:
- In the presence of moisture and elevated temperatures, lime can react with tricalcium aluminate (C3A) in the cementitious matrix.
- This reaction forms ettringite crystals, which expand as they grow.
Negative Effects on Hardened Concrete:
- Expansion and Cracking: The formation of ettringite crystals can lead to the expansion of concrete. This expansion, if significant, may cause internal stresses and cracking within the concrete. Cracking is a critical concern as it can compromise the structural integrity and durability of the concrete.
- Reduced Strength and Durability: The expansion associated with delayed ettringite formation can result in a decrease in the compressive strength of the concrete. Additionally, the cracking induced by the expansion may allow harmful substances such as water, chlorides, and other aggressive agents to penetrate the concrete, reducing its long-term durability.
- Aesthetic Issues: Cracking and expansion due to DEF can also lead to aesthetic concerns, impacting the appearance of the concrete surface.
- Structural Concerns: In severe cases, the internal stresses and cracking caused by delayed ettringite formation may compromise the overall structural performance of the concrete.
Conditions Favoring DEF:
- DEF is more likely to occur under specific conditions, including high temperatures during the curing period, elevated moisture levels, and the presence of reactive aggregates.
- The use of high-lime-content materials or the introduction of lime after concrete has hardened can contribute to the risk of DEF.
Prevention and Mitigation:
- To minimize the risk of DEF, it's essential to control the mix design, curing conditions, and the quality of materials used in concrete construction.
- The careful selection of cement types, aggregates, and admixtures can help mitigate the potential negative effects of lime on hardened concrete.

In summary, the interaction of lime with hardened concrete leading to delayed ettringite formation poses challenges in terms of expansion, cracking, and potential reductions in strength and durability. As such, it is crucial to follow good concrete practices, consider material compatibility, and carefully control mix proportions to minimize the risk of DEF and its associated negative effects.

Index Properties and Key Parameter of Soil - Civil Engineering

✔ Vk on March 15, 2023 0 Comment

Index Properties and Parameters of Soil

DEFINITIONS OF BASIC KEY TERMS OF SOIL

Index Properties of Soil

Water Content

Water content (w) is the ratio of the weight of water to the weight of solids.often expressed as a percentage

Index Properties of Soil

Void Ratio

Void ratio (e) is the ratio of the volume of void spaces to the volume of solids.The void ratio is usually expressed as a decimal quantity.

Index Properties of Soil

Porosity

Porosity (n) is the ratio of the volume of voids to the total volume of soil.

Index Properties of Soil

Degree of Saturation

Degree of saturation (S) is the ratio of the volume of water to the volume of voids.

Index Properties of Soil

Bulk Unit weight

Bulk unit weight (γ) is the weight density, that is, the weight of a soil per unit volume.

Index Properties of Soil

Saturated Unit Weight

Saturated unit weight (γsat) is the weight of a saturated soil per unit volume.

Index Properties of Soil

Dry Unit Weight

Dry unit weight (γd) is the weight of a dry soil per unit volume.

Index Properties of Soil

Effective Unit Weight

Effective unit weight (γ′) is the weight of a saturated soil submerged in water per unit volume.

Index Properties of Soil

Relative Density

Relative density (Dr) is an index that quantifes the degree of packing between the loosest and densest state of coarse-grained soils.

Index Properties of Soil

Density Index

Density index (Id) is a similar measure (not identical) to relative density.

Index Properties of Soil

Unit Weight

Unit weight ratio or density ratio (Rd) is the ratio of the unit weight of the soil to that of water.

Index Properties of Soil

Swell Factor

Swell factor (SF) is the ratio of the volume of excavated material to the volume of in situ material (sometimes called borrow pit material or bank material).

Index Properties of Soil

Liquid Limit

Liquid limit (LL) is the water content at which a soil changes from a plastic state to a liquid state.

Index Properties of Soil

Plastic Limit

Plastic limit (PL) is the water content at which a soil changes from a semisolid to a plastic state.

Index Properties of Soil

Shrinkage Limit

Shrinkage limit (SL) is the water content at which a soil changes from a solid to a semisolid state without further change in volume.

Index Properties of Soil

Plasticity Index

Plasticity index (PI) is the range of water content for which a soil will behave as a plastic material (deformation without cracking).

Index Properties of Soil

Liquidity Index

Liquidity index (LI) is a measure of soil strength using the Atterberg limits (liquid and plastic limits based on test data).

Index Properties of Soil

Shrinkage Index

Shrinkage index (SI) is the range of water content for which a soil will behave as a semisolid (deformation with cracking).

Common Building Stones - Qualities and Uses

✔ Vk on March 15, 2023 0 Comment

The Qualities and Uses of common Building Stones

Common Building Stones

The following are the some of commonly used stones:

(i) Basalt and trap
(ii) Granite
(iii) Sand stone
(iv) Slate
(v) Laterite
(vi) Marble
(vii) Gneiss
(viii) Quartzite.

Their qualities and uses of Building Stone

(i) Basalt and Trap:

The structure is medium to fine grained and compact. Their colour varies from dark gray to black. Fractures and joints are common. Their weight varies from 18 kN/m3 to 29 kN/m3. The compressive strength varies from 200 to 350 N/mm2. These are igneous rocks. They are used as road metals, aggregates for concrete. They are also used for rubble masonry works for bridge piers, river walls and dams. They are used as pavement.