Chain Survey - Introduction and Condition for its use - Civil Engineering

Chain Survey - Introduction and Condition for its use 

Chain Survey

  • Chain surveying is the simplest method of surveying.
  • Measurements for this survey are taken on the field and other supplementary works like plotting and calculations are carried out in office.
  • The measurements in chain surveying are linear.
  • Chain, tape, ranging rod, arrows and, cross staff are the tools required for chain surveying.
  • It is used when plans are required on a large scale.

It can be used if the area meets the following conditions:

  • 1. The area shall be fairly small.
  • 2. The ground is fairly levelled and open with simple details
  • 3. The area needs to be open.

For more
Other Important Topic Related to Surveying in Civil engineering

SHARE THIS

Author:

Etiam at libero iaculis, mollis justo non, blandit augue. Vestibulum sit amet sodales est, a lacinia ex. Suspendisse vel enim sagittis, volutpat sem eget, condimentum sem.

0 Comments: